;*******************************************************************************
; Example configuration for a calibration type ExtendWithPnaMeasure using 1 port
;*******************************************************************************
[CAL_ExtendWithPnaMeasure_1Port]
AutoAntiAliasing = 1
CalAcquireTimeoutSec = 60
CalSetDescription = Cal set for CAL_ExtendWithPnaMeasure_1Port
CalSetToExtend = CAL_SParam_1Port
CalType = ExtendWithPnaMeasure
ConfigType = Calibration
DirectoryToUse = C:\Example
LoadFilename = After_Cal_SParam_1Port.csa
PathName = PATH_1
SaveFilename = After_CAL_ExtendWithPnaMeasure_1Port.csa

; FCM calibration device definition
[FCM_1]
ConfigType = Fcm
IpAddress = 10.11.0.201
ResponseTimeoutSec = 60

; Path referenced by calibration defining which device will be used
[PATH_1]
ConfigType = Path
PnaPort1Device = FCM_1:1

; PNA definition
[PNA-X]
ConfigType = Pna
DirectoryToUse = C:\Temp
IpAddress = 10.11.0.203